Water Leak & Flood damage restoration

One of the major applications is for the restoration of water and flood damages in buildings, warehouses, houses etc. When a water leak damage or flood damage happens, there is a limit for draining the water. Even after the water is completely drained out, the whole place will be wet causing further damages. In order to reduce the damages, the water has to be dried out immediately. Air heater is an obvious choice, but not the best one. If you use an air heater, the moisture dries out but there is no escape route for a high amount of moisture. You need to convert the moisture into the water and remove out of the closed area. As the air is continuously dried, the water affected areas and goods get dry too.

Applications of dehumidifiers for drying water and flood damage

Generally, we can use these dehumidifiers for any water leak affected areas. Few of the common applications are given below:

  1. Restoration of rooms, buildings, car parks etc. affected by flood or heavy rains.
  2. Villas and flats affected by water leak or pipe damages.
  3. Villas and flats affected by leakage from the HVAC system.
  4. Drying of carpets in homes, villas, offices etc.
  5. Restoration of Warehouses and factories flooded with water.

Models of dehumidifiers for water damage restoration

The following are the list of few of our models for the restoration of water damage in residential and commercial applications.

  1. Dehumidifier model VAC-CDT-30 for water leak restoration

    1. The capacity of dehumidifier VAC-CDT-30 at 30 degrees Celsius, 80% relative humidity is 30 litres per 24 hours.
    2. Airflow is 250-cubic meter per hour.
    3. Operating temperature range is 3 to 32 degrees Celsius.
    4. Operating humidity range is 40 to 100 per cent.
    5. Height with handle down is 736 millimetres.
    6. Height with handle up is 1016 millimetres.
    7. The refrigerant of dehumidifier VAC-CDT-30 is R134a.
    8. Width is 426 millimetres.
    9. Depth is 506 millimetres.
    10. Weight is 32 kilograms.
    11. Water container of VAC-CDT-30 is 7 litres.
  2. Air Dryer model VAC-CDT-30-S for water leak restoration

    1. The capacity of air dryer VAC-CDT-30-S at 30 degrees Celsius, 80% relative humidity is 30 litres per 24 hours.
    2. Airflow is 350*-cubic meter per hour.
    3. Operating temperature range is 3 to 32 degrees Celsius.
    4. Operating humidity range is 40 to 100 per cent.
    5. Height with handle down is 736 millimetres.
    6. Height with handle up is 1016 millimetres.
    7. The refrigerant of VAC-CDT-30-S is R134a.
    8. Width is 426 millimetres.
    9. Depth is 506 millimetres.
    10. Weight is 34 kilograms.
    11. Water container of Air dryer model VAC-CDT-30-S is 7 litres.

    *Measured without air ducts connected
    Request Quote from Vacker Global

  3. Dehumidifier model VAC-CDT-40 for drying water leak

    1. The capacity of the dehumidifier model VAC-CDT-40 at 30 degrees Celsius, 80% relative humidity is 39 litres per 24 hours.
    2. Airflow is 350-cubic meter per hour.
    3. Operating temperature range is 3 to 32 degrees Celsius.
    4. Operating humidity range is 40 to 100 per cent.
    5. Height with handle down is 823 millimetres.
    6. Height with handle up is 1190 millimetres.
    7. The refrigerant of VAC-CDT-40 is R407c.
    8. Width is 542 millimetres.
    9. Depth is 539 millimetres.
    10. Weight is 43 kilograms.
    11. Water container of dehumidifier model VAC-CDT-40 is 14 litres.
  4. Dehumidifier model VAC-CDT-40-S for a flood restoration

    1. The capacity of dehumidifier VAC-CDT-40-S at 30 degrees Celsius, 80% relative humidity is 39 litres per 24 hours.
    2. Airflow is 560*-cubic meter per hour.
    3. Operating temperature range is 3 to 32 degrees Celsius.
    4. Operating humidity range is 40 to 100 per cent.
    5. Height with handle down is 823 millimetres.
    6. Height with handle up is 1190 millimetres.
    7. The refrigerant of the dehumidifier model VAC-CDT-40-S is R407c.
    8. Width is 542 millimetres.
    9. Depth is 539 millimetres.
    10. Weight is 46 kilograms.
    11. Water container of VAC-CDT-40-S is 14 litres.

    *Measured without air ducts connected

  5. Air dryer model VAC-CDT-60 for water drying

    1. The capacity of Air dryer VAC-CDT-60 at 30 degrees Celsius, 80% relative humidity is 62 litres per 24 hours.
    2. Airflow is 725-cubic meter per hour.
    3. Operating temperature range is 3 to 32 degrees Celsius.
    4. Operating humidity range is 40 to 100 per cent.
    5. Height with handle down is 903 millimetres.
    6. Height with handle up is 1270 millimetres.
    7. The refrigerant of Air dryer VAC-CDT-60 is R407c.
    8. Width is 542 millimetres.
    9. Depth is 539 millimetres.
    10. Weight is 47 kilograms.
    11. Water container of VAC-CDT-60 is 14 litres.
  6. Dehumidifier model VAC-CDT-90 for flood and water damage

    1. The capacity of Dehumidifier VAC-CDT-90 at 30 degrees Celsius, 80% relative humidity is 94 litres per 24 hours.
    2. Airflow is 1000-cubic meter per hour.
    3. Operating temperature range is 3 to 32 degrees Celsius.
    4. Operating humidity range is 40 to 100 per cent.
    5. Height with handle down is 977 millimetres.
    6. Height with handle up is 977 millimetres.
    7. The refrigerant of Dehumidifier VAC-CDT-90 is R407c.
    8. Width is 650 millimetres.
    9. Depth is 593 millimetres.
    10. Weight of VAC-CDT-90 is 62 kilograms.

Also, you may have a look at our water leak detection and alert system which will generate phone call alerts as soon as a water leak is detected.

Request Quote from Vacker Global

In the Middle East, we serve the United Arab Emirates, Kingdom of Saudi Arabia, Oman, Qatar, Bahrain, Iraq, Lebanon, Syria, Egypt, Jordan, Libya, Tunisia, etc.
In Africa, we serve countries including Kenya, Algeria, Tanzania, Djibouti, Chad, Ghana, Rwanda, Uganda, Nigeria, Ethiopia, Morocco, Angola, South Africa, etc.

Also, we supply to India, Bangladesh, Pakistan, Afghanistan, Kazakhstan, Srilanka, Maldives, and Cyprus.