Dehumidifiers for libraries, document storage

Libraries, document archives, document storage companies etc. require controlled humidity for which we supply a wide range of dehumidifiers. These are generally refrigerant type dehumidifiers. They will be either wall-mounted or floor-mounted models. We can supply any type of dehumidifiers based on your requirements.

How to control humidity in libraries, document storage areas, document archiving areas etc?

The humidity content increases due to many factors such as air conditioning, external humidity, the number of people occupying the area etc. It is extremely important to control humidity in all such areas. The gradual damage caused by humidity will be irreversible for any type of documents, films, microfilms, books etc. In order to reduce humidity in such areas, you can use condensation type dehumidifiers or desiccant type dehumidifiers based on selection criteria. They condition the air inside the area to control humidity on a continuous basis.

Models of dehumidifier for libraries and document archives

Few of our models of dehumidifiers are listed hereunder. In order to decide the right dehumidifiers in terms of capacity and mounting arrangements, you may contact one of our offices. The capacity calculation is based on the size of the room, temperature and present humidity. Also, you need to specify the desired humidity for us to calculate the required capacity.

  1. Specifications of dehumidifier for libraries and document archives; model VAC-CDF-40

    1. Operating temperature range is 3 to 32 degrees Celsius.dehumidifier-libraries-document-storage-VAC-CDF-40-UAE-Saudi-Qatar-Oman-Kuwait-Iraq-Erbil-Bahrain
    2. Operating humidity range of this dehumidifier for libraries and document storages is 40-100% relative humidity.
    3. Dehumidification at 30 degrees Celsius, 60% relative humidity is 30 litres per 24 hours.
    4. Airflow is 400 cubic metre per hour.
    5. The power supply is 230 Volt, Single-phase, 50 Hz.
    6. power consumption is 0.78 kilowatt.
    7. Sound pressure level at 1 metre is 46dB(A).
    8. The refrigerant of VAC-CDF-40 is R407c.
    9. The filter is G3 PPI 15.
    10. Product size (w x d x h) is 1010 x 327.8 x 699.9 millimetres.
    11. Weight of this dehumidifier for libraries and document storages, model VAC-CDF-40 is 56.5 kilograms.
    12. Condensate drain size (stub) is ¾ inch.
  2. Specifications of dehumidifier for libraries and document archives; model VAC-CDF-50

    1. Operating temperature range is 3 to 32 degrees Celsius.
    2. Operating humidity range is 40-100% relative humidity.
    3. Dehumidification at 30 degrees Celsius, 60% relative humidity is 53 litres per 24 hours.
    4. Airflow is 680 cubic metre per hour.
    5. The power supply of this dehumidifier for libraries and document storages is 230 Volt, Single-phase, 50 Hz.
    6. power consumption is 1.37 kilowatt.
    7. Sound pressure level at 1 metre is 47dB(A).VackerGlobal-dehumidifeir-with-external-sensor-option
    8. The refrigerant of this dehumidifier for libraries and document storages VAC-CDF-50 is R407c.
    9. The filter is G3 PPI 15.
    10. Product size (w x d x h) is 1060 x 327.8 x 699.9 millimetres.
    11. Weight of VAC-CDF-50 is 65 kilograms.
    12. Condensate drain size (stub) is ¾ inch.
  3. Specifications of dehumidifier for libraries and document archives; model VAC-CDF-70

    1. Operating temperature range of these dehumidifiers for libraries and document storages is 3 to 32 degrees Celsius.
    2. Operating humidity range is 40-100% relative humidity.
    3. Dehumidification at 30 degrees Celsius, 60% relative humidity is 55 litres per 24 hours.
    4. Airflow is 900 cubic metre per hour.dehumidifier-with-BMS-connection-and-alert-system
    5. The power supply is 230 Volt, Single-phase, 50 Hz.
    6. power consumption is 1.5 kilowatt.
    7. The sound pressure level of these dehumidifiers for libraries and document storages at 1 metre is 50dB(A).
    8. The refrigerant of VAC-CDF-70 is R407c.
    9. The filter is G3 PPI 15.
    10. Product size (w x d x h)  of this dehumidifier for libraries and document storages is 1495 x 327.8 x 699.9 millimetres.
    11. Weight of VAC-CDF-70 is 75.5 kilograms.
    12. Condensate drain size (stub) is ¾ inch.

Features of dehumidifiers for libraries and document storage; Model VAC-CDF series

  1. These dehumidifiers for libraries and document storages consists of a powder-covered, strong and robust hot galvanized sheet metal cabinet.
  2. For high corrosion resistance, the evaporator and condenser coils are epoxy-coated.
  3. Using a wall mounting strip supplied with the unit, it is fixed to the wall.
  4. At the bottom is the condensate outlet. You can connect the outlet stub to a 3⁄4 “pipe.
  5. These dehumidifiers for libraries and document storages have an external link to the power supply.
  6. There is an electronic control for active, demand-controlled defrosting.
  7. In order to carry out the servicing easily, there is a service valve for the refrigerant circuit.
  8. If you want to record the data, the electronic board has a USB port.

Controls of dehumidifiers for libraries and document storage; Model VAC-CDF series

  1. These models of dehumidifiers for libraries and document storage have built-in electronic hygrostat and thermostat.
  2. It has integrated ON/OFF control of humidity and temperature.
  3. There is an auxiliary contact for connecting into an alarm system.
  4. The power supply for control valve, exhaust fan and pump/boiler is 230 Volt.
  5. If you want to connect the same to Building Management System, there is a RS 485 port

Optional accessories for dehumidifiers for libraries and document storage; Model VAC-CDF series

  1. We can supply a wireless remote control for humidity control for these dehumidifiers for libraries and document storages.
  2. If you want to keep the dehumidifier on the floor, there is an optional floor mounting kit.
  3. Water heating coils can be incorporated as an optional item.
  4. A control valve can be provided for water heating coils.
  5. In order to operate at a lower temperature, we can provide electric heating coils.
  6. Exhaust fans can be optionally provided.

Dehumidifier with BMS connection; Model VAC-CDF series

Even though this is a small-sized wall mounted dehumidifier, it has many features including BMS connection. Upon removing the front cover, there is a small control panel on the top right side of the dehumidifier. As shown in this image there is a couple of provision for connection of BMS, External sensor and Alarm signals. The BMS connection is through a Modbus protocol via an RS485 port. If you want BACNet, KNX etc., you can use an external interface to convert the signals before connecting to your Building Management System (BMS).

Dehumidifier with External Alarm, Phone & SMS alert; Model VAC-CDF series

The dehumidifier model VAC-CDF has provision for connecting an external alarm and a phone call & SMS alert system. There is a NO/NC contact (zero potential). You can connect an external alar or a phone call alert system. We can supply a SIM card based phone alert system. It can make phone calls to alert up to 8 operators and deliver a recorded voice message.

Request Quote from Vacker Global

In the Middle East, we supply dehumidifiers for libraries and document storages in the United Arab Emirates, Kingdom of Saudi Arabia, Oman, Qatar, Bahrain, Iraq, Lebanon, Egypt, Jordan, Libya, Tunisia etc.
In Africa, we supply dehumidifiers for libraries and document storages in countries including Kenya, Algeria, Tanzania, Djibouti, Chad, Ghana, Rwanda, Uganda, Nigeria, Ethiopia, Morocco, Angola, South Africa etc.

Also, we supply dehumidifiers for libraries and document storages in India, Bangladesh, Pakistan, Afghanistan, Kazakhstan, Srilanka, Maldives and Cyprus.