Home › Solvent Vapour Detector E2610-VOC

Solvent Vapour Detector E2610-VOC

Solvent vapour detector is suitable for applications such as storing of solvents, painting chambers and other confined spaces where volatile organic compounds can accumulate toxic or potentially explosive concentrations.

Solvent Vapour Detector model VAC-E2610-VOC

  1. VAC-E2610-VOC has a long-lasting metal-oxide gas detector.
  2. Range of measurement for this solvent vapour detector is 0-100% LEL or 0-100 to 0-1000 ppm.
  3. Resolution of measurement for VAC-E2610-VOC is 0.1% LEL/1 ppm.
  4. It has two relays with switch-over contact.
  5. Alarm for this solvent vapour detector can be acoustic or visual.

Specifications of Solvent vapour detector model VAC-E2610-VOC:

  1. VAC-E2610-VOC target gases are toulene, xylene, ethanol etc.
  2. The default calibration for VAC-E2610-VOC is toulene.
  3. The sensor type used is metal oxide semiconductor.
  4. The solvent vapour detector model VAC-E2610-VOC sampling method is diffusion.
  5. Detection range options for VAC-E2610-VOC is 0-100 to 0-1000 ppm or 0-100% LEL.
  6. Resolution of this solvent vapour detector model VAC-E2610-VOC is 1ppm/0.1% LEL.
  7. The signal is updated every 1 second.
  8. Response time for this solvent vapour detector model VAC-E2610-VOC is ~<120 seconds.
  9. Warm-up time is less than or equal to 1 minute.
  10. Self-diagnostics with full functionality check at start-up.
  11. Solvent vapour detector model VAC-E2610-VOC sensor lifetime is more than 5 years.
  12. It has 12 months maintenance interval.
  13. The power supply of this solvent vapour detector model VAC-E2610-VOC is 24 V DC/AC or 90 to 265 VAC.
  14. The power consumption is less than 2 VA.
  15. Solvent vapour detector model VAC-E2610-VOC has UART digital interface.
  16. VAC-E2610-VOC has a red blinking LED buzzer alarm.
  17. It has 2 output relays with switch-over contact with 250 VAC or 30 VDC at 5 A max current.
  18. The default warning set-points for this solvent vapour detector model VAC-E2610-VOC for the 0-500 ppm range at Low is 100 ppm while at High is 300 ppm, release 70.
  19. The default warning set-points for this solvent vapour detector model VAC-E2610-VOC for the 0-100% LEL range at Low is 10% LEL while at High is 25% LEL, release 7.
  20. It has an ABS plastic enclosure with ventilation slots and IP20 safety ratings.
  21. The dimensions of this solvent vapour detector model VAC-E2610-VOC is H 85 × W 85 × D 36 millimetres.
  22. It can be operated at residential, business and industrial indoor spaces.
  23. Operating conditions for VAC-E2610-VOC is -30 to +70 degree Celsius at 15-95% relative humidity, without condensation, non-ATEX areas, normal ambient oxygen level, and non-aggressive atmosphere.

We supply solvent vapour detector across the world covering Europe, USA, Latin America, Asia, Australia, New Zealand, Canada etc.

In the Middle East, we solvent vapour detector in the United Arab Emirates, Kingdom of Saudi Arabia, Oman, Qatar, Bahrain, Iraq, Lebanon, Egypt, Jordan, Libya, Tunisia etc.

In Africa, we supply solvent vapour detector in countries including Kenya, Algeria, Tanzania, Djibouti, Chad, Ghana, Rwanda, Uganda, Nigeria, Ethiopia, Morocco, Angola, South Africa etc.

Also, we supply solvent vapour detector to India, Bangladesh, Pakistan, Afghanistan, Kazakhstan, Srilanka, Maldives and Cyprus.