Ozone detector transmitter is suitable for applications such as swimming pools and spa, food
factories, disinfection or bleaching sites, and other confined spaces where potentially toxic
concentrations of ozone may accumulate.
Ozone Detector Transmitter model VAC-E2608-O3
- VAC-E2608-O3 is a long-lasting electrochemical sensor.
- Range of measurement for this ozone detector is 0-5ppm.
- Resolution of measurement for VAC-E2608-O3 is 0.03 ppm.
- 0.3 ppm or 1 ppm is the default alarm set-points.
- It has 2 analogue outputs settable at 4-20 mA or 0-10 V with RS485 Modbus RTU digital interface.
Specifications of Ozone detector transmitter model VAC-E2608-O3:
- VAC-E2608-O3 can detect Ozone O3 gas.
- Calibration for VAC-E2608-O3 is Ozone.
- Sensor type used is electrochemical.
- The ozone detector transmitter model VAC-E2608-O3 sampling method is diffusion.
- Detection range for VAC-E2608-O3 is 0-5ppm (peak 50 ppm).
- The digital unit is 0.01 ppm O3.
- The repeatability of VAC-E2608-O3 is less than 2% of the signal.
- The signal is updated every 1 second.
- Response time for this ozone detector transmitter model VAC-E2608-O3 is less than 60 seconds.
- It has 6 months maintenance interval.
- Ozone detector transmitter model VAC-E2608-O3 sensor lifetime is 2 years.
- Self-diagnostics with full functionality check at start-up.
- Warm-up time is less than or equal to 1 minute.
- The power supply of this ozone detector transmitter model VAC-E2608-O3 is 11-30 VDC, 24 VAC or 90-265 VAC.
- The power consumption is less than 2 VA.
- VAC-E2608-O3 has RS485 Modbus RTU digital interface.
- It has 2 analogue outputs settable to 4-20 mA or 0-10 V.
- The recommended output scale width for this ozone detector transmitter model VAC- E2608-O3 is 20-100% of the range with more than 10 × resolution in any case.
- It has 2 SPST output relays (closing contact) with 250 VAC or 30 VDC at 5 A max current.
- The default warning set-points for this ozone detector transmitter model VAC-E2608-O3 at RE1 (LOW) is set at 0.3, release 0.24 ppm.
- The default warning set-points for this ozone detector transmitter model VAC-E2608-O3 at RE2 (HIGH) is set at 1 ppm, release 0.8 ppm.
- It has a light grey, wall-mounted ABS plastic enclosure and an IP65 safety rating.
- The dimensions of this ozone detector transmitter model VAC-E2608-O3 is H85 × W82 × D55 millimetres.
- It has an IP65 secured remote sensor probe, shielded cable. The cable's default length is 3.0 meters.
- It can be operated at industrial indoor and outdoor locations.
- Operating conditions for VAC-E2608-O3 is 0-50 degree Celsius at 15-90% relative humidity, 0.9-1.1 atmospheric pressure, non-ATEX rated areas, non-aggressive atmosphere.
NOTE: The sensor may be prone to chlorine and nitrogen dioxide.
We supply an ozone detector transmitter across the world covering Europe, USA, Latin America, Asia, Australia, New Zealand, Canada etc.
In the Middle East, we supply an ozone detector transmitter in the United Arab Emirates, Kingdom of Saudi Arabia, Oman, Qatar, Bahrain, Iraq, Lebanon, Egypt, Jordan, Libya, Tunisia etc.
In Africa, we supply an ozone detector transmitter in countries including Kenya, Algeria, Tanzania, Djibouti, Chad, Ghana, Rwanda, Uganda, Nigeria, Ethiopia, Morocco, Angola, South Africa etc.
Also, we supply an ozone detector transmitter to India, Bangladesh, Pakistan, Afghanistan,
Kazakhstan, Srilanka, Maldives and Cyprus.