Home › Nitric Oxide Detector Transmitter E2638-NO

Nitric Oxide Detector Transmitter E2638-NO

Nitric oxide detector-transmitter is suitable for applications such as chemical industry, medicine, laboratories, and other confined spaces where it is possible to accumulate a toxic concentration of nitric oxide.

Nitric Oxide Detector-Transmitter model VAC-E2638-NO

  1. VAC-E2638-NO is a long-lasting electrochemical cell.
  2. Detection range for this nitric oxide detector-transmitter is 0-250 ppm NO.
  3. It has 2 analogue outputs settable at 4-20 mA or 0-10 V with RS485 digital interface.
  4. There is an available relay or LCD indicator.
  5. The sensor can be attached or remotely.

Specifications of Nitric oxide detector-transmitter model VAC-E2638-NO:

  1. Calibration for VAC-E2638-NO is Nitric oxide NO.
  2. Sensor type used is an electrochemical cell.
  3. The nitric oxide detector-transmitter model VAC-E2638-NO sampling method is diffusion.
  4. Detection range for this nitric oxide detector-transmitter model VAC-E2638-NO is 0-250 ppm.
  5. Resolution of VAC-E2638-NO is 1 ppm.
  6. Maximum overload of this nitric oxide detector-transmitter model VAC-E2638-NO is 1000 ppm.
  7. The signal is updated every 1 second.
  8. Response time is less than 40 seconds.
  9. It has a 6 months maintenance interval.
  10. The sensor lifetime of this nitric oxide detector-transmitter model VAC-E2638-NO is more than 2 years.
  11. Self-diagnostics with full functionality check at start-up.
  12. Warm-up time is less than or equal to 1 minute.
  13. The power supply of this nitric oxide detector-transmitter model VAC-E2638-NO is 11-30 VDC, 24 VAC or 90-265 VAC.
  14. The power consumption is 2 VA.
  15. Nitric oxide detector-transmitter model VAC-E2638-NO has RS485, Modbus RTU protocol digital interface.
  16. It has 2 analogue outputs settable at 4-20 mA or 0-10 V.
  17. The recommended output scale width of this nitric oxide detector-transmitter model VAC-E2638-NO is 20-100% of the range with more than 10 x resolution in any case.
  18. It has a grey ABS plastic enclosure and an IP65 safety rating.
  19. The dimensions of the nitric oxide detector-transmitter model VAC-E2638-NO is H90 × W145 × D55 millimetres. If with cable glands, height is 140 millimetres.
  20. It can be operated at industrial indoor and outdoor areas.
  21. Operating conditions of this nitric oxide detector-transmitter model VAC-E2638-NO is -30 to 50 degrees Celsius at 15-90% relative humidity with ±10% atmospheric pressure, non-ATEX rated spaces, non-aggressive atmosphere.

NOTE: The sensor can be highly sensitive to hydrogen sulfide and nitrogen dioxide.

Additional Options:

  1. It has an IP65 secured remote sensor probe, shielded cable. The cable’s default length is 3.0 meters.

Relay Outputs:

  1. It has 2 SPST output relays (closing contact) with 250 VAC or 30 VDC at 5 A max current.
  2. The default alarm set-points of this nitric oxide detector-transmitter model VAC-E2638-NO at RE1 (Low) is set at 10, release 8 ppm.
  3. The default alarm set-points of this nitric oxide detector-transmitter model VAC-E2638-NO at RE2 (High) is set at 25, release 20 ppm.
  4. It has a red and green LEDs visual alarm.
  5. 85 dB acoustic buzzer alarm is available.

LCD Indicator:

  1. Operating temperature for the LCD indicator is 0 to +50 degrees Celsius.
  2. The display dimensions of this nitric oxide detector-transmitter model VAC-E2638-NO LCD indicator is 72 × 36 millimetres.
  3. VAC-E2638-NO LCD indicator has 3.5 7-segment number of digits.
  4. The character height in the LCD indicator is 14 millimetres.
  5. Nitric oxide detector-transmitter model VAC-E2638-NO LCD indicator has a backlight feature.

Note: For an LCD version, only one analogue output is available.

We supply nitric oxide detector-transmitter across the world covering Europe, USA, Latin America, Asia, Australia, New Zealand, Canada etc.

In the Middle East, we supply nitric oxide detector-transmitter in the United Arab Emirates, Kingdom of Saudi Arabia, Oman, Qatar, Bahrain, Iraq, Lebanon, Egypt, Jordan, Libya, Tunisia etc.

In Africa, we supply nitric oxide detector-transmitter in countries including Kenya, Algeria, Tanzania, Djibouti, Chad, Ghana, Rwanda, Uganda, Nigeria, Ethiopia, Morocco, Angola, South Africa etc.

Also, we supply nitric oxide detector-transmitter to India, Bangladesh, Pakistan, Afghanistan, Kazakhstan, Srilanka, Maldives and Cyprus.