Home › E2658-CO Flameproof Carbon Monoxide Detector Transmitter

E2658-CO Flameproof Carbon Monoxide Detector Transmitter

This carbon monoxide detector-transmitter is a flameproof transmitter which can be used in ATEX Zones 2 and 22.

Flameproof Carbon Monoxide Detector-Transmitter model VAC-E2658-CO:

  1. VAC-E2658-CO is suitable for ATEX Zones 2 and 22.
  2. The detection range of this carbon monoxide detector-transmitter model VAC-E2658-CO is 0 to 1000 ppm CO.
  3. The resolution is 1 ppm CO.
  4. VAC-E2658-CO has 2 analogue outputs settable at 4-20 mA or 0-10 V with RS485 digital interface.
  5. It has two SPST relays as an option.

Specifications of Flameproof Carbon Monoxide Detector-Transmitter model VAC-E2658-CO:

  1. VAC-E2658-CO can detect Carbon Monoxide CO.
  2. Sensor type used is an electrochemical cell.
  3. The carbon monoxide detector-transmitter model VAC-E2658-CO sampling method is diffusion.
  4. The detection range for this carbon monoxide detector-transmitter model VAC-E2658-CO is 0 to 1000 ppm CO.
  5. VAC-E2658-CO has 1 ppm resolution. 
  6. The accuracy is ± 5 ppm CO.
  7. The signal is updated every 1 second. 
  8. The response time is ~30 seconds.
  9. The maintenance interval of this carbon monoxide detector-transmitter model VAC-E2658-CO is 6 months.
  10. The sensor lifetime is more than 6 years.
  11. Self-diagnostics with full functionality check at start-up.
  12. Warm-up time is less than or equal to 1 minute.
  13. The power supply of this carbon monoxide detector-transmitter model VAC-E2658-CO is 11 to 30 VDC / 24 VAC. Option: 90 to 265 VAC power unit.
  14. The power consumption is less than 2 VA.
  15. VAC-E2658-CO has a digital interface for RS485 connections working on Modbus RTU protocol.
  16. It has 2 analogue outputs settable at 4-20 mA or 0-10 V.
  17. VAC-E2658-CO has a grey die-cast aluminium, IP66 enclosure.
  18. The dimensions of this carbon monoxide detector-transmitter model VAC-E2658-CO is H120 × W125 × D57 mm.
  19. VAC-E2658-CO is flameproof, ATEX: II 2 GD and Ex ed IIC T4 Gb.
  20. The cable gland is M25 for SWA cable or steel conduit with the diameter of 10 to 17 mm.
  21. The wire conductor range is 0.5 to 1.5 mm2.
  22. VAC-E2658-CO can be operated at industrial indoor and outdoor areas, safe areas and ATEX Zones 2 and 22.
  23. Operating conditions of this carbon monoxide detector-transmitter model VAC-E2658-CO is -20 to +50 °C, 15 to 95 %RH, pressure 1 atm ±10%; avoid exposure to corrosive gases.
  24. As an option, VAC-E2658-CO has 2 SPST relay outputs (closing contact), 250 VAC / 30 VDC, 5 A max. The default alarm set-points are RE1 (LOW): set 25; release 20 ppm and RE2 (HIGH): set 35; release 28 ppm.

We supply flameproof carbon monoxide detector-transmitter across the world covering Europe, USA, Latin America, Asia, Australia, New Zealand, Canada etc.

In the Middle East, we supply flameproof carbon monoxide detector-transmitter in the United Arab Emirates, Kingdom of Saudi Arabia, Oman, Qatar, Bahrain, Iraq, Lebanon, Egypt, Jordan, Libya, Tunisia etc.

In Africa, we supply flameproof carbon monoxide detector-transmitter in countries including Kenya, Algeria, Tanzania, Djibouti, Chad, Ghana, Rwanda, Uganda, Nigeria, Ethiopia, Morocco, Angola, South Africa etc.

Also, we supply flameproof carbon monoxide detector-transmitter to India, Bangladesh, Pakistan, Afghanistan, Kazakhstan, Srilanka, Maldives and Cyprus.