Carbon monoxide detector is suitable for applications such as underground parking, boiler houses, kitchens, and other confined spaces, where it is possible to accumulate potentially toxic concentration of carbon monoxide.
Carbon Monoxide Detector model VAC-E2630-CO:
- VAC-E2630-CO has a stable long-life electrochemical cell.
- The detection range of this carbon monoxide detector model VAC-E2630-CO is 0 to 200 ppm CO.
- VAC-E2630-CO has two relays with switch-over contact.
- It has an acoustic and visual alarm.
- This carbon monoxide detector model VAC-E2630-CO has an UART digital interface.
- It has a magnetic key switching.
Specifications of carbon monoxide detector model VAC-E2630-CO:
- VAC-E2630-CO can detect Carbon Monoxide CO.
- Sensor type used is an electrochemical cell.
- The carbon monoxide detector model VAC-E2630-CO sampling method is diffusion.
- The standard detection range for this carbon monoxide detector model VAC-E2630-CO is 0 to 200 ppm. High-0 to 1000 ppm CO.
- VAC-E2630-CO has 1 ppm resolution.
- The accuracy is ± (3% of range + 5 ppm CO).
- The signal is updated every 1 second.
- The response time is ~30 seconds.
- The maintenance interval of this carbon monoxide detector model VAC-E2630-CO is 6 months.
- The sensor lifetime is more than 6 years.
- Self-diagnostics with full functionality check at start-up, testing by magnetic switch.
- Warm-up time is less than or equal to 1 minute.
- The power supply of this carbon monoxide detector model VAC-E2630-CO is 24 V DC/AC or 90 to 265 VAC.
- The power consumption is less than 2 VA.
- VAC-E2630-CO has an UART digital interface.
- It has a blinking LED and 85 dB buzzer as the alarms.
- It has 2 relay outputs with switch-over contact, 250 VAC / 30 VDC, 5 A max.
- When the detection range is 0 to 200 ppm, the default alarm set-points are release – 18, LOW – 25, HIGH – 125 ppm. When the detection range is 0 to 1000 ppm, the default alarm set-points are release – 88, LOW – 125, HIGH – 250 ppm.
- VAC-E2630-CO has a dark grey wall-mount ABS plastic, IP65 enclosure.
- The dimensions of this carbon monoxide detector model VAC-E2630-CO is H90 × W145 × D55 mm.
- It has an output cable with the maximum diameter of 8 mm.
- VAC-E2630-CO can be operated at residential, business and industrial indoor spaces.
- Operating conditions of this carbon monoxide detector model VAC-E2630-CO is -20 to +50 °C, 15 to 95 %RH, pressure 0.9 to 1.1 atm non ATEX rated areas.
We supply carbon monoxide detector across the world covering Europe, USA, Latin America, Asia, Australia, New Zealand, Canada etc.
In the Middle East, we supply carbon monoxide detector in the United Arab Emirates, Kingdom of Saudi Arabia, Oman, Qatar, Bahrain, Iraq, Lebanon, Egypt, Jordan, Libya, Tunisia etc.
In Africa, we supply carbon monoxide detector in countries including Kenya, Algeria, Tanzania, Djibouti, Chad, Ghana, Rwanda, Uganda, Nigeria, Ethiopia, Morocco, Angola, South Africa etc.
Also, we supply carbon monoxide detector to India, Bangladesh, Pakistan, Afghanistan, Kazakhstan, Srilanka, Maldives and Cyprus.