Ammonia Detector Transmitter E2648-NH3-E

This ammonia detector-transmitter can be used for leakage control in refrigeration facilities, warehouses etc. And not recommended to use in spaces with constantly high ammonia concentration such as cattle, pig and poultry livestock houses as it shortens the sensor lifetime.

Ammonia Detector-Transmitter model VAC-E2648-NH3-E:

  1. VAC-E2648-NH3-E is easy to install with a robust enclosure.
  2. The detection range of this ammonia detector-transmitter is 0 to 100, 0 to 300 or 0 to 1000 ppm NH3.
  3. It has 2 analogue outputs settable at 4-20 mA or 0-10 V. 
  4. VAC-E2648-NH3-E has a digital interface for RS485 connections working on Modbus RTU protocol.
  5. This ammonia detector-transmitter has the relay option and remote probe option.

Specifications of Ammonia detector-transmitter model VAC-E2648-NH3-E:

  1. VAC-E2648-NH3-E can detect Ammonia NH3.
  2. Sensor type is an electrochemical.
  3. The ammonia detector-transmitter model VAC-E2648-NH3-E sampling method is diffusion.
  4. The detection range for this ammonia detector-transmitter model VAC-E2648-NH3-E is 0 to 100, 0 to 300 or 0 to 1000 ppm.
  5. Maximum overload of this ammonia detector is 200 ppm with the 0 to 100 ppm detection range. When the detection range is 0 to 300 ppm, maximum overload is 500 ppm. When the detection range is 0 to 1000 ppm, maximum overload is 1500 ppm.
  6. It has 1 ppm resolution/ digital unit with the 0 to 100 ppm detection range. When the detection range is 0 to 300 ppm, the resolution/ digital unit is 2 ppm. And when the detection range is 0 to 1000, the resolution/ digital unit is 5 ppm.
  7. The response time T90 is less than 40 s when the detection range is 0 to 100 ppm or 0 to 300 ppm. When the detection range is 0 to 1000 ppm, response time T90 is less than 60 s. 
  8. Maintenance interval of this ammonia detector-transmitter model VAC-E2648-NH3-E is 6 months.
  9. The sensor lifetime is 2 years.
  10. Self-diagnostics with full functionality check at start-up.
  11. Warm-up time of VAC-E2648-NH3-E is less than or equal to 1 minute.
  12. The power supply of this ammonia detector-transmitter model VAC-E2648-NH3-E is 11 to 30 VDC or 24 VAC. Option: 90 to 265 VAC power unit. 
  13. Power consumption is less than 2 VA.
  14. VAC-E2648-NH3-E has a digital interface for RS485 connections working on Modbus RTU protocol.
  15. It has 2 analogue outputs settable at 4-20 mA or 0-10 V.
  16. VAC-E2648-NH3-E has die-cast aluminium, wall mount, IP66 enclosure.
  17. Dimensions of this device is H120 × W125 × D57 mm.
  18. The device can be operated in the industrial indoor and outdoor areas.
  19. Operating conditions of VAC-E2648-NH3-E is -40 to 50 °C, 15 to 90 %RH, pressure 0,9 to 1,1 a38tm non ATEXrated areas and non-aggressive atmosphere.

We supply ammonia detector-transmitter across the world covering Europe, USA, Latin America, Asia, Australia, New Zealand, Canada etc.

In the Middle East, we supply ammonia detector-transmitter in the United Arab Emirates, Kingdom of Saudi Arabia, Oman, Qatar, Bahrain, Iraq, Lebanon, Egypt, Jordan, Libya, Tunisia etc.

In Africa, we supply ammonia detector-transmitter in countries including Kenya, Algeria, Tanzania, Djibouti, Chad, Ghana, Rwanda, Uganda, Nigeria, Ethiopia, Morocco, Angola, South Africa etc.

Also, we supply ammonia detector-transmitter to India, Bangladesh, Pakistan, Afghanistan, Kazakhstan, Srilanka, Maldives and Cyprus.